SKID SAFE

ND AGGREGATE™ with our SKID SAFE Water Based Sealer and Finish creates non slip floor finish that can reduce slip and fall hazards on floor surfaces like ceramic tiles, masonry, concrete, driveways, garages and vinyl floors. If you are looking for non slip flooring, non skid coating, slip not system, slip and fall prevention, anti slip treatment, slip resistant flooring, traction coating, chemical resistant coating you do not need to look any further. Our system is guaranteed for 5 years on all flooring materials with proper application and maintenance according to our directions.*

DESCRIPTION:

A special white aluminum oxide which is extremely hard and durable under heavy foot traffic and under the heavy weight of tires and should not be crushed by such weight even after many years! It is lightly broadcast onto our freshly applied SKID SAFE Water Based Sealer/Finish when it s still wet. While the aggregate is white, it will be barely visible, or invisible when standing or sitting in a chair on the floor when lightly broadcast. It's appearance changes to clear when properly top sealed with an additional 5 coats of our SKID SAFE Water Based Sealer/Finish. 1 lb. will cover about 160 sq ft.

DIRECTIONS FOR USE WITH SKID SAFE TO CREATE
TRUE TRACTION NON SLIP SURFACE:

We highly recommend that you practise and develop your technique to properly apply the aggregate on to our SKID SAFE by test applying it to any loose tiles, or small floor area before proceeding with the entire job area. Apply SKID SAFE following all of our directions to a section of the floor. Apply a first coat of SKID SAFE to a small area of the floor (using a quality sponge mop which has been pre-washed and is thoroughly dried ) so that it is easy for you to stand over it and broadcast ND AGGREGATE™. While SKID SAFE is still wet hold a small amount of the aggregate in your hand and throw it straight up-slightly. The aggregate will fall evenly over this wet SKID SAFE area. Then, apply another small area of SKID SAFE and repeat the above process until the entire floor area has been sealed with a first coat of SKID SAFE with the broadcast of our ND AGGREGATE™.

Use a fan or a blower (rent or buy at a janitorial store) to help blow dry each coat of SKID SAFE. Open windows for ventilation. Apply in low to moderate humidity. High humidity will greatly increase the drying and curing times. Each coat should now dry in about 20 minutes or less.

When the first coat is absolutely dry use a LOW PRESSURE SPRAYER (about 35-65PSI) to apply coats 2-6 so as not to disturb the aggregate which a sponge mop will. Consult with any hardware or janitorial store to purchase a low pressure sprayer. Each successive coat must be absolutely dry to the touch before applying the next coat.

After the entire 6 coat of SKID SAFE is completed, 96 hours more time is needed to allow our finish to CURE (GET VERY HARD ). If you cannot close the floor to foot traffic for the next 96 hours, cover the floor with a cardboard masked down to enable foot traffic after 8 hours of drying time. Remove the cardboard after 4 DAYS. Use normally.

Click Here For Complete SKID SAFE DIRECTIONS

MAINTENANCE:

Clean this floor ONLY with a NEUTRAL CLEANER (PH of 7)! Other cleaners can quickly dull, and or damage SKID SAFE. You may clean the floor with a light scrubbing machine and NEUTRAL CLEANER, or with a powerwasher. Do not use disinfectants known to harm plastics/floor finishes.

For more information please click on the following links: Material Safety Data Sheet (MSDS), Label, Pictures & References, SKID SAFE Product Data with Directions

Order Also These Products With ND AGGREGATE™:

SKID SAFE - Together with ND AGGREGATE™ Creates Non Slip Floor Finish With True Traction

SUPER BOND & CLEAN™ - Creates Proper Adhesion of SKID SAFE to Ceramic Tiles

CONCRETE BOND & CLEAN™ - Cleans & Prepares Concrete for SKID SAFE Application

 

About How Much SKID SAFE and ND AGGREGATE™ Do I Need?

NON POROUS FLOOR MATERIAL such as porcelain, ceramic tiles, metal, currently sealed flooring or fiberglass:
You need to apply 6 separate coats according to our directions. The approximate coverage for all 6 applied coats is about 448 sq.ft. per gallon. Divide your floor sq.ft. area by 448 to show the amount of gallons of SKID SAFE Water Based Sealer/Finish that you need. Divide your floor sq.ft. area by 160 to show the amount of NDAGGREGATE™ needed.

POROUS FLOOR MATERIAL such as vinyl, quarry tile, brick, wood, concrete, masonry and porous paint:
You need to apply 6 separate coats according to our directions. The approximate coverage for all 6 applied coats is about 170 sq.ft. per gallon. Divide your floor sq.ft. area by 170 to show the amount of gallons of SKID SAFE Water Based Sealer/Finish that you need. Divide your floor sq.ft. area by 160 to show the amount of ND AGGREGATE™ needed.

We encourage all to pre test our products for their application to determine the exact spread rates on their flooring material.

CLICK PRICE BELOW TO ORDER:

WARNING: SKID SAFE CANNOT BE ALLOWED TO FREEZE IN THE CONTAINER AS IT WILL RUINED WHEN THAWED! Please order NEXT DAY AIR shipment of this product if you are living in areas affected by cold - freezing weather.

Above: Ceramic Tile on pool deck, cleaned with SUPER BOND & CLEAN™, sealed with SKID SAFE
and with ND AGGREGATE™ to create no slip floor finish with true traction.

* Always test the product on a small area first to insure adequate surface preparation, compatibility and desired results. Do not use SKID SAFE on areas that will be under standing water over 5 days. We make no claim to prevent slip/fall accidents when using SKID SAFE! The user is provided additional slip resistance, and or, true traction through the proper use of our products-only. We encourage all to thoroughly test and evaluate this product, and our other fine products, for suitability of purpose and function.

SKID SAFE is but one of our many fine exclusive products specifically designed to solve problems for which solutions are difficult or impossible to find which we have been successfully marketing to industry since 1986.

OUR PRODUCT PERFORMANCE GUARANTEE:

We guarantee your satisfaction when ordering our products in Quarts or smaller sizes (including all KITS) and 1 lb ND AGGREGATE™ for 30 days from the date that you receive your order. This guarantee is limited to one unit of each product. The purpose of this guarantee is to allow our customers at no cost (besides the cost of shipping/handling) to test our products for suitability before ordering larger quantities. Testing our products on a small inconspicuous area will demonstrate its performance for your end use, and it will allow you to determine the exact spread rates of our sealers/finishes so that you will know how much product you need for your project. Contact us to complete our RETURN/REFUND FORM so that we may learn about your reasons for a return and properly credit your credit card when we authorize your request. Our form will be emailed to you. Provide an accurate email address. This Guarantee does not cover any of our products in gallon, or larges sizes; it covers only quart sizes and 1 lb bags of ND AGGREGATE™, and is limited to one unit per product.

FIVE-YEAR WARRANTY:

Your purchase of any of our primers/sealers/finishes/coatings is warranted to perform according to our specifications whenapplied and maintained according to our directions for 5 years. This warranty does not cover: misuse, misapplication, poor maintenance and high gloss. Your rights under this warranty are not transferable. Only the original buyer may file a claim with us under this warranty. If we determine the validity of a claim under this warranty, we will refund or replace the product(s) at your option less the time that the product(s) performed from the 5 year period. Example: If the product performed for 2.5 years, you could receive a refund of half the product cost, or replace the product at a credit of half of the List Price towards replacement.

LIMITATION OF LIABILITY:

You understand and agree that the owners of this site shall not be liable for any direct, indirect, incidental, consequential or exemplary damages, including but not limited to, damages for loss of profits, data or other intangible losses (even if the owners of this site have been advised of the possibility of such damages), resulting from the use or the inability to use the product(s) and or service(s) or any misuse of the product(s) and or service(s) in a manner not in accordance with their intended use. The user assumes full responsibility and risk in testing this product for the particular application and for determination of proper disposal method of chemical residues and cleaning implements according to State and Federal regulations. In no event shall New Dimensions Solutions, LLC be liable for consequential or incidental damages exceeding the cost of this product.