ND GRAFFITI SHIELD™ is Part 2 of our GRAFFITI SHIELD SYSTEM™, it is anti-graffiti protective coating that will prevent typical damages often seen when attempting to remove graffiti spray paints and marker inks from wall paints, and on all wall materials. It may be installed both inside and outside the property. It eliminates the need to repaint a wall caused by damage to the wall paint by the removal methods used. It eliminates the formation of "shadows" commonly seen on walls after attempted cleanings.ND GRAFFITI SHIELD™ is applied in 4 coats over ONE COAT™ Primer/Sealer/Finish.

ND GRAFFITI SHIELD™ is water based, safe and pleasant to use as directed and is extremely low in odor. It dries water clear and enhances the natural appearance of all materials and underlying paints while preventing paints from fading/oxidizing for many years. It is also resistant to attracting soils and dust. Walls stay cleaner looking much longer. Clean from normal soils with just plain water. New graffiti is removed with our DISAPPEAR Organic Graffiti/Adhesive Remover™. Our protective coatings system do not require stripping and they function as a primer should a color change be desired; then, apply it over the new painted color

1. Available in Glossy and in Satin/Matte Version
2. Prevents Graffiti Damage to Sealed Surfaces
3. Can be Installed on Almost Any Surface or Object
4. Very Low VOC: Only 16.2 g/l per California VOC Regulations
5. Exceptional Durability and Resistance To Staining
6. Does Not Attract Soils and Dust
7. Water Based: Very Low Odor, Easy Cleanup
8. Warranted For 5 years*

 

TECHNICAL DATA:

Appearance: White emulsion
Color: Milky White
State: Liquid
Odor: Mild acrylic odor
Specific Gravity: 1.04
Vapor Density > 1
Vapor Pressure: 17 mm Hq at 20 C/68 F Estimate
Freezing Point: 0 C/34 F Initial
Boiling Point: 212 F Estimate
Solubility in Water: Dilutable
Evaporation Rate: > 1
Ph: 7.5 - 7.8
VOC: 16.2 g/l per California VOC Regulations
Shelf Life: Indefinite
Cure Time: 96 hours
Non Flammable
Non Combustible

 

1. Porous materials such as concrete, brick, blocks, stucco:
- In most cases you will need to apply 2 separate coats of ONE COAT™ according to our directions. The approximate coverage is about 330 sq.ft. per gallon for two coats.
- You need to apply 4 separate coats of ND GRAFFITI SHIELD™ according to our directions. The approximate coverage is about 250 sq.ft. per gallon for all 4 coats.

2. Semi-porous materials such as indoor/outdoor house paint, wood:
- You need to apply 2 separate coats of ONE COAT™ according to our directions. The approximate coverage is about 660 sq.ft. per gallon for both two coats.
- You need to apply 4 separate coats of ND GRAFFITI SHIELD™ according to our directions. The approximate coverage is about 500 sq.ft. per gallon for all 4 coats.

3. Non-porous materials such as metals, plastics, non-porous paint:
- You need to apply one single coat of ONE COAT™ according to our directions. The approximate coverage for this coat is about 2000 sq.ft. per gallon.
- You need to apply 4 separate coats of ND GRAFFITI SHIELD™ according to our directions. The approximate coverage is about 500 sq.ft. per gallon for all 4 coats.

The best method to determine the spread rate for these products on your material is to pre-test them on a small inconspicuous area according to our Directions. Our estimates should not be relied on to be accurate for your application..

WARNING: ONE COAT™ AND ND GRAFFITI SHIELD™ CANNOT BE ALLOWED TO FREEZE IN THE CONTAINER
AS THEY WILL RUINED WHEN THAWED! Please order NEXT DAY AIR Shipment of these products if you are living in areas affected by cold - freezing weather.

 

ND GRAFFITI SHIELD™ APPLICATION DIRECTIONS:
ND GRAFFITI SHIELD SYSTEM™ Directions Are HERE

The substrate must be first primed with ONE COAT™ Water Based Primer/Sealer/Finish in sufficient quantity so that it is visible and can be felt on the surface. After it is dry to the touch apply ND GRAFFITI SHIELD™ by spray (airless sprayer with 0.015 or 0.013 tip at about 300-500 PSI is recommended for most large painted and all porous surfaces; low pressure hand pump sprayer at about 35 PSI could be used on very porous surfaces). The application should be thin and ND GRAFFITI SHIELD™ should appear water clear when applied. THE GRAFFITI SHIELD SYSTEM™ is a total of 4 separate coats of ND GRAFFITI SHIELD™ over the base application of ONE COAT™. Each coat must be dry to the touch before next coat is applied. Drying time may vary between few minutes to an hour depending upon the weather, humidity and ventilation.

THE GRAFFITI SHIELD SYSTEM™ should be used after 96 hours which is the cure time. You can protect the wall while it is curing by covering it with a drop cloth or securing the area. Should cleaning be necessary before 96 hours, reapply ND GRAFFITI SHIELD™ to the needed areas only. Do not allow this product to freeze and do not use it in freezing temperatures. However, once it is applied and cured, freeze/thaw cycles will have no effect on proper product performance.

Remove new graffiti from THE GRAFFITI SHIELD SYSTEM™ in 24 hours or less for better results. Use our DISAPPEAR Organic Graffiti/Adhesive Remover™ - apply to area and allow it to soak on graffiti for 5 minutes to about 15 minutes and flush with water, clean with a soft cloth, or powerwash the area. When necessary, touch up cleaned areas with a light coat of ND GRAFFITI SHIELD™.

Please test this product on a small inconspicuous area before proceeding with the job.

WARNING: THIS PRODUCT CANNOT BE ALLOWED TO FREEZE IN THE CONTAINER!

 

OUR PRODUCT PERFORMANCE GUARANTEE:

We guarantee your satisfaction when ordering our products in Quarts or smaller sizes (including all KITS) and 1 lb ND AGGREGATE™ for 30 days from the date that you receive your order. This guarantee is limited to one unit of each product. The purpose of this guarantee is to allow our customers at no cost (besides the cost of shipping/handling) to test our products for suitability before ordering larger quantities. Testing our products on a small inconspicuous area will demonstrate its performance for your end use, and it will allow you to determine the exact spread rates of our sealers/finishes so that you will know how much product you need for your project. Contact us to complete our RETURN/REFUND FORM so that we may learn about your reasons for a return and properly credit your credit card when we authorize your request. Our form will be emailed to you. Provide an accurate email address. This Guarantee does not cover any of our products in gallon, or larges sizes; it covers only quart sizes and 1 lb bags of ND AGGREGATE™, and is limited to one unit per product.

FIVE YEAR WARRANTY:

Your purchase of any of our primers/sealers/finishes/coatings are warranted to perform according to our specifications when applied and maintained according to our directions for 5 years. This warranty does not cover: misuse, misapplication, poor maintenance and high gloss. Your rights under this warranty are not transferable. Only the original buyer may file a claim with us under this warranty. If we determine the validity of a claim under this warranty, we will refund or replace the product(s) at your option less the time that the product(s) performed from the 5 year period. Example: If the product performed for 2.5 years, you could receive a refund of half the product cost, or replace the product at a credit of half of the List Price towards replacement.

LIMITATION OF LIABILITY:

You understand and agree that the owners of this site shall not be liable for any direct, indirect, incidental, consequential or exemplary damages, including but not limited to, damages for loss of profits, data or other intangible losses (even if the owners of this site have been advised of the possibility of such damages), resulting from the use or the inability to use the product(s) and or service(s) or any misuse of the product(s) and or service(s) in a manner not in accordance with their intended use. The user assumes full responsibility and risk in testing this product for the particular application and for determination of proper disposal method of chemical residues and cleaning implements according to State and Federal regulations. In no event shall New Dimensions Solutions, LLC be liable for consequential or incidental damages exceeding the cost of this product.