| Related
Products: |
|
|
|
|
This
unique water based salt solution deep cleans ceramic tiles
and creates perfect bond for our SKID SAFE Water Based Sealer/Finish.
SKID SAFE Water Based Sealer/Finish provides Extremely High
Slip Resistance (ASTM C 1028 Dry: COF=.81; Wet: COF = .77)
to make your ceramic tiles much less slippery whether they
are dry or wet. SKID SAFE also provides exceptional durability,
resistance to staining, and ease of maintenance because it
does not need to be stripped. It is Warranted for 5 years!
For maximum protection that our products can offer against
slip and falls use SKID SAFE with ND AGGREGATE™. These
two products create NON SLIP TRUE TRACTION FLOOR COATING.
SUPER BOND AND CLEAN™ has NO VOC's, NO ACIDS, and is
NON FLAMMABLE.
SUPER
BOND AND CLEAN™ is BIODEGRADABLE and has only slight
dull odor.
Your successful installation of our products and years of
extraordinary benefits they offer is possible only if you
read and follow our directions/precaution exactly as they
are written. They are result of years of research, development
and testing, so please take your time to familiarize yourself
with them. If you have any questions please do not hesitate
to contact us.
ATTENTION: FOLLOW THE DIRECTIONS ON THE PRODUCT
BOTTLES AS THEY WERE SHIPPED TO YOU. WE WILL NOT BE RESPONSIBLE
FOR ANY PROBLEMS CAUSED BY NOT FOLLOWING OUR DIRECTIONS.
Order
Also These Products With SUPER BOND & CLEAN™:
SKID SAFE -
Extremely High Slip Resistant Floor Finish That May
Reduce Fall Hazards On Slick Flooring Surfaces*
ND AGGREGATE™-
Together
with SKID SAFE Creates Non Slip Floor Finish With True Traction
*
Always test the product on a small area first to insure adequate
surface preparation, compatibility and desired results. Do
not use SKID SAFE on areas that will be under standing water
over 5 days. We make no claim to prevent slip/fall accidents
when using SKID SAFE! The user is provided additional slip
resistance, and or, true traction through the proper use of
our products-only. We encourage all to thoroughly test and
evaluate this product, and our other fine products, for suitability
of purpose and function.
| Click
Below For More Information: |
| |
|
|
|
|
|
| |
| |
| |
| |
| |
| |
| |
|
| |
| |
|
| |
Above:
Ceramic Tile on pool deck, cleaned with SUPER BOND &
CLEAN™, sealed with SKID SAFE
and with ND AGGREGATE™ to create no slip floor finish
with true traction.
APPLICATION DIRECTIONS:
1. Test this product on a spare tile sample, or in a small
inconspicuous area for suitability before treating the
whole floor/wall. Read all Precautions and Directions
thoroughly before using this product.
Precautions: Adjacent areas must be properly protected
when using this product. Though harmless to most building
surfaces, the damage SUPER BOND & CLEAN™ causes
to glass, soft metal is considered permanent. Cover all
nearby windows and aluminum with plastic sheeting and
plastic tape. Also, protect vegetation. SUPER BOND &
CLEAN™ turns foliage brown on contact, and if drawn
up through plants roots, it dehydrates and can kill them.
Cover plants with plastic sheeting to keep concentrated
SUPER BOND & CLEAN™ off foliage, and protect
roots by either containing the rinse or trenching it away.
Wear rubber gloves and safety goggles. If working indoors
ventilate the area.
2. Strip old seals/finishes with a stripper to clear all
pores of the grout lines and to clean and to strip tiles.
Rinse the residue and neutralize the surface with a water-vinegar
rinse of 4-1, or use a neutralizer. Let the floor dry.
3. Use a clean pre-rinsed and dried mop, or a quality
sponge mop to apply SUPER BOND & CLEAN™ at full
strength at about 400 sq.ft. per gallon (100 sq.ft. per
quart). Do not mix it with water. Make sure that the floor/wall
are all well covered with this product. Allow SUPER BOND
& CLEAN™ to soak on the floor/wall for 3 minutes.
DO NOT ALLOW OUR PRODUCT TO REMAIN ON THE FLOOR FOR LONGER
THAN 3 MINUTES. Closely monitor the work area making sure
that it is at all times thoroughly covered with the product,
and treat only as big area as you can handle. SUPER BOND
& CLEAN™ must not dry out on tiles, or any surfaces.
Dried whitish residues cannot be removed by normal cleaning!
Removal requires our FROSTING REMOVER™. DO SMALL
AREAS TO INSURE EASIER REMOVAL AT 3 MINUTES.
4. Clean the floor thoroughly with mop and clean water
three times to remove all loose residues of SUPER BOND
& CLEAN™ with a wet vac. Let the floor dry.
It should look dull. If there is any visible loose dried
film of residue of SUPER BOND & CLEAN™ on it,
mop and wet vac the floor again.
5. Let the floor/wall dry for about an hour. When dry,
the tiles should look dull, because there is now a frosting
on them to create excellent adhesion for our SKID SAFE
Water Based Sealer/Finish. Note: If applying our GROUT
COATING, do so now according to our directions for GROUT
COATING.
6. Seal the tile floor/wall with 4 coats of SKID SAFE
Water Based Sealer/Finish applied one coat at a time after
each coat is absolutely dry-to-the-touch.
PRECAUTIONS: Wear rubber gloves and safety
goggles, when handling SUPER BOND & CLEAN™.
Ventilate enclosed areas. If SUPER BOND & CLEAN™
gets on skin or into eyes, rinse immediately with water.
See Material Safety Data Sheet for more detailed hazard
evaluation and safety information.
Environmentally Safe: SUPER BOND &
CLEAN™ is readily biodegradable and releases no
V.O.C.s. When used properly, it poses no threat to the
environment. Dispose of all wastes safely according to
federal, state and local regulations.
FIRST AID: Rinse eyes thoroughly for
15 minutes and seek medical attention. Rinse skin thoroughly
with running water. If ingested drink large amounts of
water or milk, DO NOT INDUCE VOMITING, and seek medical
attention.
LIMITATION OF LIABILITY: The user accepts full
responsibility and risk in testing this product for the
particular application. In no event shall NEW DIMENSIONS
Solutions, LLC be liable for consequential or incidental
damages exceeding the cost of this product.
NOTICE: DO NOT STORE NOR USE THIS PRODUCT
BELOW 45° F! IF THIS PRODUCT IS BELOW 45° F, REHEAT
BEFORE USE AND ONLY USE IT WHEN THE TEMPERATURE IS OVER
45° F.
CAUTION: CONTAINS FLURIDE SALTS THAT
MAY BE HARMFUL OR FATAL IF SWALLOWED. KEEP OUT OF REACH
OF CHILDREN, FROM GLASS, AND METAL TRIM.
MAKE YOUR FLOOR NON SLIP BOTH WET AND DRY!
Install
SKID SAFE with our special ND AGGREGATE™
on any flooring material. Our ND AGGREGATE™ is virtually
unnoticeable when standing and looking at any completed
application. It is pleasant to walk on in bare feet, and
is used to protect swimming pool/sauna/shower areas. Now,
instead of sliding into second base on a wet marble/terrazzo
lobby floor, your shoe will grip on our special application
firmly when wet. Test it at no risk and prove it to yourself!
Warranted for 5 Years.
Take
Advantage of our Lower Prices as
a Special Celebration of 24 Years in Business!
100%
MONEY BACK GUARANTEE
including
Shipping Costs**
NO HANDLING FEE ON ALL ORDERS
Test
Our Products With
COMPLETE CONFIDENCE
and NO RISK!
Please read below for details.
|
CLICK
PRICE BELOW TO ORDER:
|
PRODUCT
|
SIZE |
SHIPPING
WEIGHT (lbs)
|
PRICE
|
| SUPER
BOND & CLEAN™
(1
quart per 100 sq ft.) |
QUART
(32 oz) |
4 |
|
| CASE
of 12 QUARTS |
35 |
|
| 5-GALLON
PAIL |
57 |
|
|
ND
AGGREGATE™
(1
lb covers about 160 sq ft.) |
1
lb (16 oz) |
1 |
|
| 5
lbs (80 oz) |
5 |
|
| 10
lbs (160 oz) |
10 |
|
SKID
SAFE
Water
Based Sealer/Finish
(Please
go to SKID SAFE page
for product coverage information)
|
QUART
(32 oz) |
3 |
|
| CASE
of 12 QUARTS |
30 |
|
| GALLON
(128 oz) |
11 |
|
| CASE
of 4 GALLONS |
38 |
|
| 5-GALLON
PAIL |
48 |
|
| |
|
|
NON SLIP SKID SAFE SYSTEMS™
For Tile, Porcelain, Brick or Limestone:
|
| |
|
| |
| |
NON SLIP SKID SAFE SYSTEMS™
For
Concrete:
|
1. SMALL NON SLIP SKID SAFE SYSTEM™ For Concrete
Treats about 40 sq.ft.
of Concrete
Contains: 1 Quart SKID SAFE, 1 lb ND AGGREGATE™,
1 Quart CONCRETE & CLEAN™
Price per System:
$113.85
Test
this System with with NO RISK**.
100% MONEY BACK
GUARANTEE, INCLUDING SHIPPING COSTS.
|
|
|
We
highly recommend that you test our products on your material
to learn the exact spread rate for all required coats!
All
Our Products Are Proudly Made In The U.S.A.
New
Dimensions Solutions, LLC
3960
Howard Hughes Parkway, Suite 500
Las Vegas, NV 89169
(800) 731-2231, FAX: (866) 361-1558
sales@ndclean.com
**PRODUCT
PERFORMANCE GUARANTEE:
100%
MONEY BACK GUARANTEE
including Shipping Costs
We
guarantee your satisfaction when ordering our products
in Quarts or smaller sizes (including all KITS) and
1 lb ND AGGREGATE™ for 30 days from the date that
you receive your order. This guarantee is limited to
one unit of each product. The
purpose of this guarantee is to allow our customers
at no cost including the cost of shipping/handling
to test our products for suitability before ordering
larger quantities. Testing our products on a small inconspicuous
area will demonstrate its performance for your end use,
and it will allow you to determine the exact spread
rates of our sealers/finishes so that you will know
how much product you need for your project. Contact
us to complete our RETURN/REFUND FORM so that we may
learn about your reasons for a return and properly credit
your credit card when we authorize your request. Our
form will be emailed to you. Provide an accurate email
address. This Guarantee does not cover any of our products
in gallon, or larges sizes; it covers only quart sizes
and 1 lb bags of ND AGGREGATE™, and is limited
to one unit per product.
Your
purchase of any of our primers/sealers/finishes/coatings
is warranted to perform according to our specifications
whenapplied and maintained according to our directions
for 5 years. This warranty does not cover: misuse, misapplication,
poor maintenance and high gloss. Your rights under this
warranty are not transferable. Only the original buyer
may file a claim with us under this warranty. If we determine
the validity of a claim under this warranty, we will refund
or replace the product(s) at your option less the time
that the product(s) performed from the 5 year period.
Example: If the product performed for 2.5 years, you could
receive a refund of half the product cost, or replace
the product at a credit of half of the List Price towards
replacement.
You
understand and agree that the owners of this site shall
not be liable for any direct, indirect, incidental, consequential
or exemplary damages, including but not limited to, damages
for loss of profits, data or other intangible losses (even
if the owners of this site have been advised of the possibility
of such damages), resulting from the use or the inability
to use the product(s) and or service(s) or any misuse
of the product(s) and or service(s) in a manner not in
accordance with their intended use. The user assumes full
responsibility and risk in testing this product for the
particular application and for determination of proper
disposal method of chemical residues and cleaning implements
according to State and Federal regulations.
In no event shall New Dimensions Solutions, LLC be liable
for consequential or incidental damages exceeding the
cost of this product.
|
|
| |
| |
|
